| To
apply the brake push the lever down (this can be a little difficult to do with a large
walking boot on especially if the seat is fully reclined). Once
the lever has passed a certain point it springs down into place, projecting a steel rod
into cogs on both of the rear wheels - locking the brake on.
To
remove the brake flick the lever up, we recommend that you always use the safety wrist
strap when walking so that if you should stumble the pushchair cannot run away from you.
For
additional safety always park your Mountain Buggy ATP facing across a slope or up hill of
an obstacle, e.g. a tree or rock. |