The benefit of removing the wheels is to make the pushchair more compact for storage or transportation and also to avoid transferring dirt from the wheels to the inside of your car.

The Mountain Buggy wheels are removable and it isn't difficult to do, removing all three wheels takes less than a minute, but you may not want to do it everytime you put it in the car. It is worth noting that the size and shape of the pushchair is only significantly changed by removing the rear wheels not the front, so you can leave this on.

If you don't think that you will remove the wheels to fit it into your car then please check the dimensions carefully (see the Mountain Buggy Specifications pages Single Terrain, Single Urban, Double Terrain).

click the image to enlarge

• unscrew the knob on the axle
• withdraw bolt
• remove wheel

(The double terrain has two front wheels with a spacer between them but is otherwise the same)

Note, refit bolt and knob to pushchair to avoid losing them

click the image to enlarge

• unscrew the knob on the axle
• withdraw bolt
• remove wheels

Note, refit bolt and knob to pushchair to avoid losing them

click the image to enlarge

• unscrew the knob on the axle
• withdraw bolt
• remove wheels

Note, refit bolt and knob to pushchair to avoid losing them

simply the reverse of the above

• locate wheels
• insert bolts
• hand tighten knobs

Note that the rear wheels have brake cogs which obviously go on the inside.

Tel: 01363 881110 email sales@chariotsatp.co.uk
or tell a friend about Chariots by email