Mountain Buggy Single ATP Specifications

Mountain Buggy pushchairs are suitable from birth to four years.

They are manufactured by an ISO 9002 company and comply with British Safety Standards BS7409:1996.

Mountain Buggy pushchairs are constructed of lightweight heavy duty aluminium tubing and nylon fittings, the modular design means that individual components can be replaced if necessary.

With the weight predominantly over the rear wheels the fixed front wheel gives good manoeuverability and works better off road than the swivel wheel Mountain Buggy Urban model (which is designed more for use around town).

The delightfully simple folding system makes everyday life simple and the ability to remove the wheels comes in handy when you need extra space in the boot for going on holiday.

The specifications listed below are subject to slight variations.


Upright			Imperial	Metric
	Length		44"	112 cm
	Handle Height		39"	99 cm
	Width (max)		24.5"	62 cm
	Lower Leg		9"	23 cm
	Seat Width (min)		14"	35 cm
	Weight	Zip Hammock	18.5 lbs	8.3 kg
		Recline Seat	19.5 lbs	8.8 kg
	Max Load		77 lbs	35 kg
	Max Tyre Pressure		20 psi	1.3 bar

Folded with wheels on
	Length		43"	110 cm
	Height		12"	30 cm
	Width (max)		24.5"	62 cm
	Max Tyre Pressure		20 psi	1.3 bar

Folded with wheels off
awaiting picture	Length		43"	110 cm
	Height		7"	17 cm
	Width (extreme max)		22.5"	57 cm
	Max Tyre Pressure		20 psi	1.3 bar

Please note that the specifications listed above are as accurate as is practical to give, they are rounded for ease of presentation and are subject to manufacturers change without notice. Maximum Tyre Pressure should not be exceeded and should be reduced if transported in the unpressurised cargo hold of an aircraft on a long haul flight.