
 |
raised
kicker seat extensionI
know what you're thinking...what is a 'kicker ?
The Baby Jogger City Elite seat
base can be extended by raising the kicker plate - the section which is
between the seat and the footplate - to create a continuous flat surface 17"
(43cm) deep. This is ideal for the younger baby or sleeping toddler whose
legs would overhang the standard seat and be unsupported when the seat is
reclined for them to sleep.
The kicker is secured down by velcro - it would be easy to overlook it
and not know that this facility exists !
To operate, simply lift the kicker and rest the kicker support frame on the
footplate then secure velcro strap at rear of footplate. Note the support
frame is not a flimsy affair but rather a sturdy metal rod. The Baby Jogger
City Elite can be folded
with the Kicker Raised.
It is easy to operate and constructed
with substance, i.e. it will be effective and not one of those added extras
which won't last. |
 
  |
swivel
or locked front wheel
The front wheel can be changed quickly between
swivelling and locked mode - simply shift
the lever to the desired operation.
In swivel mode the pushchair is highly
manoeuvrable - best for smooth/flat surfaces (around town) where lots of
sharp turns are required.
In locked mode the pushchair is less susceptible to deflection by rough
ground or veering downhill - best for very rough surfaces (off road) or when
traversing sloping ground. The City Elite front wheel
locks underneath the pushchair (unlike the Summit XC which reverse locks
protruding forwards), it may help when on seriously rugged terrain but will
make the steering a bit heavier. |
  |
front wheel suspensionThe front
fork wheel mounting system incorporates an effective but robust suspension
system.
It is the leading (front) wheel which causes the most abrupt jarring for the
occupant upon impact with an obstacle (object, hollow or bump). Absorbing
that impact improves the ride quality and reduces deflection of the
pushchair from it's course. |
 |
adjustable
handlebar
Adjustable to a maximum height of 117cm (46") to satisfy the tallest parent
but can be lowered in seconds - simply press the button on each side and
fold down to a lower position.
The handlebar is your
connection with the pushchair, it is how you control the pushchair so it is
important that the pressure you apply translates directly into the action
you want...a sloppy handlebar with lots of movement is unpleasant and
unhelpful.
The Baby Jogger adjustable
handlebar is firm, precise and inspires confidence. |
 

 |
City
Elite Quick Fold Mechanism
Folding a Baby Jogger City Elite is easy ! one handed !
Inside the seat is a strap handle
bearing the word 'FOLD', this operates the folding
system.
For extra security when the pushchair is in use,
operation of the folding strap handle is disabled
by two grey safety straps which
clip simply onto the frame.
To fold the pushchair detach the grey safety
straps (one on each side) and pull up the 'FOLD' handle.
Note the pushchair folds instantly and for the inexperienced perhaps a
little too fast ! it is best to 'follow through' as you pull the handle to
lift the pushchair completely from the floor.
To erect the pushchair lift up the rear handle until the
frame clicks into place and re-fix the grey safety straps.
Click to watch the
Baby
Jogger City Elite Demo Video
or see the
Baby Jogger
City Elite User Manual |
 
  |
Quick Release Wheels
Front
and rear, yes all round... not just the rear wheels.
The front fork and wheel assembly
is a single unit which can be removed with ease and simplicity from the main
frame by a quick release system - press the release lever remove wheel
downwards, off the pivot pin. To mount the front wheel simply apply the
front fork to the pivot pin, push and it automatically clicks on.
On the rear axle is a release button for the
wheel wheel press the release button and pull out
the wheel (holding the wheel by the centre hub rather the
the tyre makes it easier and keeps your hand cleaner !). To mount the
wheel simply re-insert the axle and push until you hear it 'click' into
place, then give the wheel a tug - just to double check it is securely
locked in.
Removing the wheels makes it more
compact when folded for storage and
transportation, and lighter to lift. It can also
help reduce the transfer of dirt from the wheels to the inside of your car. |

 |
Dual
Rear Parking Brake
Both rear wheels have parking brakes operated by a lever mounted on the side
of the frame near by the sun hood. Pull the lever up to apply the brake, the
lever operates a cable which projects a metal rod into cog on each rear
wheel. Note that because the two wheels are not synchronised the metal brake
rod may be correctly aligned on one wheel but not the other so it is helpful
to rock the pushchair slightly while applying the brake.
To release the parking brake return the lever back down to it's original
position BUT this cannot be done without de-activating a safety catch - very
simple to do...by a responsible adult but complicated for a child.
Note. The Baby
Jogger City Elite also
has a safety wrist strap. |
 
 
  |
Reclining SeatThe seat
can be reclined to almost flat. Padded for comfort, with five point harness
including shoulder harness height adjustment.
To lower the seat pinch the clamp and slide it DOWN the strap the seat
back will now rest on the strap in this lower position - either at it's
maximum recline or whatever angle you require.
To raise the seat pinch the clamp and slide it UP the strap the seat back
will now rest on the strap in the higher position.
The back panel of the Baby Jogger City Elite seat is a mesh/netting fabric
to permit good ventilation whilst avoiding exposure to most insects or cats.
For protection from the weather - wind rain snow or sun ! Baby Jogger have
built in a cover.
The cover is elasticated - so it will fit regardless of the angle the seat
is reclined to and when not in use it is neatly rolled up and held out of
the way.
Storage
The Baby Jogger City Elite has a reasonable sized basket
for storage under the pushchair seat plus a netting compartment on the back
of the seat and a 'parent console' immediately in front of the handlebar for
those things which need to be easily accessible without rummaging around. |
 |
Puncture
Proof Wheels
Punctures have long been a problem for parents, less so for Baby Jogger
customers because for years they have fitted heavy duty Thorn Resistant
Inner Tubes to their
pushchairs. On the City Elite they have now gone one step further and fitted
'Forever Air' tyres - normal tyres filled with a special lightweight foam
which imitates the suspension qualities of air-filled tyres...but with no
risk of getting a flat tyre. |
Long WarrantyLifetime
frame warranty for defects of materials or workmanship (not wear and tear,
accidental damage, negligence or misuse). One year warranty on fabrics, nil
warranty for punctures. |
|
The Baby Jogger City Elite is currently available in
the UK in two colours, note that the colours
available in the UK vary from those in the US, the UK model has no stripe on
the sun hood (click on an image to enlarge it) |
|
Baby Jogger City Elite
Black
     
     
     
visit our
Online Website
for
the latest City Elite Black discounted packages |
|
Baby Jogger City Elite
Sand
     
     
      
visit our
Online Website
for
the latest City Elite Sand discounted packages |
|
Baby Jogger City Elite
Black Sport
DISCONTINUED COLOUR
     
       |
|
Baby Jogger City Elite
Stone Sport
DISCONTINUED COLOUR
       
        |
|
Baby Jogger City Elite Red Sport
DISCONTINUED COLOUR
     
       |
|
We supply the
Baby Jogger City Elite with a
Rain Cover in all of our packages. There's a range of quality Baby Jogger accessories
to customise your Baby Jogger City Elite. |

 
 |
Carrycot You can use
your Baby Jogger City Elite from birth with the
standard seat fully reclined or by fitting the optional Carrycot which
converts your Baby Jogger into a 'pram' for the first few months. You can
also fit a Maxi Cosi Car Seat onto the Carrycot Support Bracket.
There are now two models of carrycot, the Deluxe Carrycot includes a Maxi
Cosi Car
Seat Adaptor. It is best fitted having first removed the standard seat
fabrics from the pushchair. The Deluxe Carrycot is slightly larger and
plusher than the alternative Compact Carrycot which does not include a car
seat adaptor but which is easier to fit onto the pushchair without removing
the standard seat fabrics.
The Baby Jogger Carrycot comes with a 'zip off' netting shade and we
supply a separate Rain Cover, our package deals often including a Sheet & Blanket Set.
Everyone uses their pushchair differently so there is no hard and fast rule
as to whether you should buy a carrycot but here are a few of the benefits
parents typically want to enjoy:
|
 |
lay flat position
- health professionals recommend that new born babies should lay flat if
possible |
 |
direct view of the baby
- the carrycot is rear facing, you can see your baby and your baby can see
you (once they can focus that far !) |
 |
less vulnerable position
- higher and less accessible position protects from small children and dogs,
unwelcome attention, unwanted germs, car fumes etc. |
 |
daytime 'travel bed'
- use independent of the
pushchair in the home, at friends or relatives as a mobile daytime cot
(NOT for night time use - different regulations apply) |
 |
'portability' - carry your baby in the
carrycot and do it securely with one hand |
|
Fitting Instructions Single Carrycot & Car Seat Adaptor |

  |
Car Seat Adaptor If you
buy the carrycot then you will automatically be able to fit a Car Seat onto
your Baby Jogger City Elite. If not then we can supply a separate Car Seat
Adaptor.
Both Car Seat Adaptors are quick fitting onto Universal Accessory
Mounting Bracket (this differs slightly from the Car Seat Adaptor included
with the Baby Jogger Carrycot which clamps onto the frame lower down)
|

 |
Footmuff
Suitable from birth with the seat in the reclined position and the front
cover of the footmuff folded down, but generous enough to accommodate an
older child to 3 years. Both you and your child will appreciate the
benefit of not having to dress them up in several layers of clothing before
going out.
But these aren't just for the coldest of winter days. On a fresh spring
morning or at dusk on a summers evening it can be quite chilly for a child
who isn't keeping warm by moving about.
This latest footmuff allows wasy operating access to the pushchair fold
strap. |
 |
Water Resistant Exterior |
 |
Machine Washable (do not tumble dry) |
 |
Drinks
Holder (Liquid Holster) The Liquid
Holster clamps easily onto the pushchair frame
where it is most convenient for you, the drinks holder part itself is
detachable from the clamp if that makes it easier for you when the pushchair
is folded and when mounted it pivots in one direction to reduce spills. Self
adjusting grips hold almost all bottle and can sizes up to 800ml. |


|
Diaper
Changing Bag
Practical
changing bag click mounted onto the side of the City Elite pushchair
provides valuable storage capacity, well designed for the purpose so you
have everything you need readily at hand without destabilising the pushchair
! Releases from the
pushchair at the press of a button, comes with handle and shoulder strap. Can be right or left side mounted, easy to fit
shares the City Elite Sun Hood mounting position
(note the Diaper Changing Bag can also be
fitted onto the City Mini and Summit XC models) |
 |
two large internal compartments (one zip access) |
 |
four large internal pockets |
 |
one full size inner internal zippered pocket |
 |
three large outer pockets |
 |
two end pockets/bottle holders |
 |
includes changing mat 65cm x 39cm |
 |
stylish but practical wipe clean fabric |
  |
Belly
Bar Some
children like to hold on to something while they ride, while for others it
is a useful to have somewhere to attach toys so they don't get lost. The
Baby Jogger Belly Bar fulfils both requirements
Clicks simply into the universal accessory mounting on your Bay Jogger
City Elite pushchair and although very securely fitted it can be removed at
the press of a button. The angle of the Belly Bar can be easily adjusted
locking into one of eight preset positions. The bar is padded and although
the fabric cover is 'wipe clean' can be zipped off for more thorough
cleaning. |
  |
Child
Tray
Somewhere to put your drink and a half eaten sandwich, a toy and a book,
some crayons, that thing you found (which mum has now cleaned) and something
you pinched from your sister ! what more could a toddler want.
And at the end of the day simply wash it down & sterilise ready for
tomorrow.
Clicks simply into the universal accessory mounting on your Baby Jogger
City Elite pushchair and although very securely fitted it can be removed at the
press of a button OR unlock one end and it pivots out of the way - it does
not have to be removed to get out of the pushchair. |
 |
Wheel
Bag A
simple and obvious solution to the problem of where to put the wheels when
you have taken them off the pushchair and how to stop the dirt on the wheels
contaminating the inside of your car.
You could just use a plastic supermarket bag to keep the wheels in and
simply discard it when dirty...but we're guessing that if you have decided
to buy a Baby Jogger then you have a sense of style ! |
 |
Travel
Bag Custom
made for the Baby Jogger pushchairs the Travel Bags are particularly useful
when going on holiday.
The Travel Bag has internal compartments for the wheels, it is made of
durable fabric and protects from knocks and scratches while also being
stylish luggage with extra space to pack other kit.
Note that although it will protect against minor knocks and bumps it is a
soft bag and cannot protect your pushchair from being crushed, e.g. in an
aircraft hold. When flying we recommend that you get the pushchair as close
as possible to the aircraft steps so that it goes on top of the luggage |
|
There is also a range of additional accessories
we have
selected over a number of years with to further customise your Baby
Jogger City Elite, the most popular of which are: |
 |
Lambskin
Stroller Fleece
Luxury - 100% Natural Lambskin shorn to an even pile for comfort and
ease of use (fewer tangles). Made from a single Lambskin Fleece, this
is not a patchwork fleece and not a short fleece with separate head piece.
Fits the Baby Jogger City Elite Seat it has holes at three levels for the
shoulder harness straps. It fits the standard seat or the carrycot, warm &
cosy in cold weather while in hot weather it absorbs perspiration releasing
it into the air to help that your child stays dry & comfortable. Lambskin
fleece soothes & calms infants and toddlers. |
 |
Shade-a-Babe UV Sun Shade These days
we are much better informed about the long term harmful effects of the sun's
rays... as well as the short term discomfort ! A baby's skin is more
sensitive to sunlight than our own and needs protection.
The Shade-a-Babe UV Sun Shade reduces UV by between 70% and 90% (Sun
Visor position cuts glare by 99%). Although the Baby Jogger
City Elite sun
hood is generously large this can only protect against direct overhead
light, the Shade-a-Babe Protects against reflected light from water (inc.
snow) or light/concrete surfaces, and which can be a significant problem.
Acts also as an insect net and cat net, shields from blustery winds and
protects against light showers with easy access 'Zip n Go' front panel. |
 |
Head
Hugger
Useful when a baby first moves up from the carrycot to the standard seat as
the shoulder harness straps may pass irritatingly close to their ears, a
head hugger can correct this by concealing the excess strap which is above
the baby's shoulders. |
|
Upright

|
Baby Jogger City Elite
Specifications
Length (max) 119 cm (47")
Handle Height Adjustable (max) 117 cm (46")
Width 69.5 cm (27.5")
Seat Width 35.5 cm (14")
Seat Depth 24 cm (9.5")
Seat Depth inc 'kicker' 43 cm (17")
Seat to Footplate 23 cm (9")
Seat Back 53 cm (21")
Maximum Head Height 66 cm (26")
Weight 12.2 kg (26 lbs)
Max Load Child, Europe EN1888 15 kg (33 lbs) US - 34 kg (75 lbs)
Recommended Tyre Pressure 20 psi 0.7 bar |
|
folded
wheels on
 |
Length 81 cm (32")
Height 33 cm (13")
Width 69.5 cm (27.5") |
|
folded
wheels off
 |
Length 70 cm (27.5")
Height 27 cm (10.5")
Width 51.5 cm (20.5")
Weight 8 kg (17 lbs) |
|
Additional Notes
Exports
We supply mainly in the UK but we often deliver to other
European countries however there are additional payment and warranty issues
which need to be discussed first, please contact us at:
EXPORT ENQUIRY |
|
visit our
Online Website
for
our latest discounted packages |