visit our Online Website  for our latest discounted packages

Now the bad news....

Pushchairs sold in the UK used to be regulated by British Standard 7409 but now it is a European Standard EN1888. The new regulation no longer tests pushchairs for their weight capacity and what use they are suitable for. Instead the new standard tests all pushchairs to a single weight and for a single use - products either pass or not. The Baby Jogger Performance has passed those tests BUT the new standard is only for a pushchair at walking speed not jogging or running. There is no test for jogging or running. As a result the Baby Jogger Performance model (designed, built and with years of proven performance for running) cannot be sold for the purpose of jogging or running, it can only be used at walking speed. (Note this may not be 100% technically accurate but it is our best understanding)

Madness ? perhaps, but on the other hand the intention is to protect your child from injury by the obvious accident or more subtle shaking/vibration which might be more likely at speed, and the problem is that the law cannot simply assume that the pushchair will be operated safely with common sense. Some people would react by not running with their child, others by taking responsibility for the care of their child when running.

We think that some parents will still choose to run with their child despite the fact that there are now no pushchairs approved for running in the EU (note if you look at manufacturers websites this may not be obvious as they are not based in the EU). We think that if you are going to do it then the Baby Jogger Performance gives your child the smoothest ride and best protection but be under no misunderstanding you will be operating the pushchair outside of it's approved use unless presumably you to take it outside of the EU to use it.

We hope that we are acting responsibly by continuing to supply this product but only having first brought your attention explicitly to this information (comments welcome !).

You might expect that a pushchair would automatically go in a straight line but in fact that is actually quite a difficult thing to achieve, everything has to be aligned perfectly. For an off road pushchair, like the Summit, any minor inaccuracy from 'true' is irrelevant compared to how the rough ground is taking it off line, but when you get onto smoother surfaces and in particular when moving quickly it is crucial that the pushchair does not veer.

For this reason the Baby Jogger Performance has an adjustment mechanism on the front wheel forks to enable you to fine tune out any veering. It can even be used to adjust to the user's own personal style ( e.g. someone who pushes with their hand on the right side of the handlebar will naturally be steering left).

Simply turn the bolt with an allen key to project or withdraw the front fork on that side (both sides are adjustable).

The Performance rear wheels have a robust suspension system. The suspension permits movement up/down to absorb jolts/bumps whilst preventing sideways movement.

The large 20" wheels offer a shallow angle of attack to bumps or hollows and together with the rear suspension enable a smoother ride for the child, while the fixed handlebar still gives you the positive action you need to manage the pushchair - push down on the handle and the pushchair moves as you direct it, none of the flex/lag of an adjustable handle.

The Baby Jogger Performance can be folded with the wheels on but it will be more compact having first removed the wheels.

At the joint where the seat frame meets the under frame are two snap locks which lock the two sections together - rotate to undo the locks, pull the seat frame out of the connector tubes and fold down.

Erecting the pushchair is simply the reverse of the above

IMPORTANT. Ensure that the snap locks are closed before using the pushchair.

Click to watch the Baby Jogger Performance Demo Video  or see the Baby Jogger Performance User Manual (note this is the US version, there isn't an online UK version available)

Removing the wheels makes it more compact for storage and transportation. It can also help reduce the transfer of dirt from the wheels to the inside of your car.

On the rear axle is a release button for the wheel axle, press the release button and pull out the wheel. To mount the wheel simply re-insert the axle and push until you hear it 'click' into place, then give the wheel a tug - just to double check it is securely locked in

On one end of the axle is a lever folded back against the frame. The 'running brake' caliper is closed over the wheel and has to be undone before the front wheel can be removed. Fold out the axle lever and undo then pull front wheel out of the forks. Mounting the front wheel is simply the reverse of the above procedure.

IMPORTANT

When remounting the wheel ensure that the axle is fully back into the forks on both sides. If it isn't then the wheel will point to the left or right...and you'll go around in circles !

Fold back the axle lever pointing to the rear of the frame rather than have it pointing forward as this reduces the chance of it getting snagged on something when you are going along.

Baby Jogger Performance has parking brakes on both rear wheels, a 'running' (deceleration) brake on the front wheel and also a safety handle wrist strap.

Lifetime frame warranty for defects of materials or workmanship (not wear and tear, accidental damage, negligence or misuse). One year warranty on fabrics, nil warranty for punctures.

The obvious difference between the previous Performance Classic and the 25th Anniversary models is 'cosmetic' - fabric & frame colours, weathershield & basket design. And in essence they are the same frame but the 25th Anniversary model (the blue one) is more than just a straight 'makeover' on the Classic model.

The substantial difference is the wheels - the 25th Anniversary model has lightweight racing wheels with narrow tyres, on the one hand they give a pushchair of lower weight and less rolling resistance so easier to run with. On the other hand they have fewer spokes and may be less robust if used on rough surfaces (more susceptible to accidental damage). The thinner tyres will not provide as much pneumatic suspension (ride quality) and with only standard inner tubes there is an increased risk of punctures.

Minor differences are that the 25th Anniversary model seat has a fixed position (it cannot be reclined), it has a zip on Weathershield rather than the more traditional rain cover, it has a fabric pocket in the side of the seat for the occupant.

Baby Jogger Performance 25th Anniversary Ice Blue

visit our Online Website  for the latest Performance 25th Anniversary Ice Blue discounted packages

Baby Jogger Performance Classic Black/Red (DISCONTINUED MODEL)

The Liquid Holster clamps easily onto the pushchair frame where it is most convenient for you, the drinks holder part itself is detachable from the clamp if that makes it easier for you when the pushchair is folded and when mounted it pivots in one direction to reduce spills. Self adjusting grips hold almost all bottle and can sizes up to 800ml.

We find that the Snuggle Bag made by Alvi of Germany actually fits the Baby Jogger Performance better than Baby Jogger's own Footmuff as the seat is more tapered to the knee than their other models.

Upright

folded wheels off

Jogging/Running/Skating

The Baby Jogger Performance is not tested/approved in the EU for greater than walking speeds.

Exports

We supply mainly in the UK but we often deliver to other European countries however there are additional payment and warranty issues which need to be discussed first, please contact us at: EXPORT ENQUIRY

visit our Online Website  for our latest discounted packages

Tel: 01363 881110 email sales@chariotsatp.co.uk
or tell a friend about Chariots by email